static check

英 [ˈstætɪk tʃek] 美 [ˈstætɪk tʃek]

网络  静态检验; 静态校验; 静态核对; 静态检查; 静态检查[检验]

计算机



双语例句

  1. With static typing, the compiler can check the values of arguments, variables, or return values against values allowed for a given operation.
    通过静态类型,编译器可以检查参数和变量的值或针对一个给定操作所允许的返回值。
  2. Finding Out the State of Mind Accurately, Adroitly Guiding Action According to Circumstances ── A bit of a class teacher s work; static scope check
    摸准心态因势利导&班主任工作点滴静态作用域检验-软件
  3. The static as-built bars can be used to check that the scheduled as built network reflects the actual as built situation.
    施工横道图可以用来检测这份网络计划与实际施工情况的契合度。
  4. The effect of crack failure of stabilizing piles on the global static and dynamic stability of soil slopes should be properly evaluated in order to check the design in practice.
    在探讨边坡中抗滑桩的加固效果时,应该重视混凝土抗滑桩不同条件下破坏规律的研究。
  5. A static page ( select below)-Check this radio button to cause a "static" Page to be displayed as your blog's front page.
    静态的网页(从下面选择)–选中这个单选按钮,这样“静态的”网页显示为你的博客首页。
  6. Multinomial regression is used for modelling static characteristics of sensor. F check shows that the method is good and practical.
    采用多项式回归分析的方法进行传感器静态特性的建模,用F检验进行的辨识表明,这种方法既通用又实用。
  7. By means of this algorithm, matrixes can be used in static test of control flow, and in the check of unstructuredness of flow chart.
    借助于此算法,可用矩阵为工具对软件的控制流作静态测试,并可对软件流程图的非结构性作出检测。
  8. The digital one includes SPEC, Verilog coding, simulation, synthesis, floorplan, routeing, static timing analyze and DRC/ LVS check.
    数字电路设计流程则包括:制定SPEC,Verilog代码编写,仿真,逻辑综合,布局,布线,静态时序综合和DRC/LVS检查。
  9. The system includes project control, secondary data analysis, seismic data analysis, surface model analysis, static correct analysis, seismic data process, evaluation, random check, statistics, report.
    整个系统包含项目管理、辅助数据分析、地震数据分析、表层模型分析、静校正分析、处理、评价、监理抽查、统计和报表十个功能模块。
  10. Through analysing sunflower-stem filled plate structure and the stress due to static bending load on it. We have derived a formula for calculating the static bending strength, Here eletric-measure method is ued to check the accuracy of this formula.
    本文通过对葵花杆填充板结构分析,静弯曲受力破坏应力分析,推导出了填充板静弯曲强度的理论计算式,通过电测法进行了验证。
  11. Discussion on use of static diagnosis in engine breakdown check
    浅谈静态诊断法在发动机故障中的应用
  12. This method improves current virtual assembly technology, which is limited to the condition of static assembly interference check.
    该方法可改善目前虚拟装配技术局限于静态装配干涉检查的状况。
  13. Based on the results from the static and dynamic test, and the appearance check of Fenglin bridges, some concrete methods for reinforcing bridges are proposed, too.
    同时据丰林大桥静、动荷载试验及外观检查结果,提出了加固补强的具体方法。
  14. A high precision static hydraulic loading system is designed with hydraulic components such as: check valves and accumulators.
    通过单向阀、蓄能器等液压元件,设计出一种较高精度的静态加载液压系统。
  15. Application of static Cone Penetration Test in Pile Shaft Check of Cement and Soil Mixed Pile
    静力触探在水泥土搅拌桩检测中的应用
  16. The instrumentation of static load, with high precision, is developed to check up the accessory used in railway.
    静加载测力仪是与铁道部科学研究院静强度实验室的合作项目,该设备直接用于铁路上相关零件的静加载力值检验,具有精度高的特点。
  17. Through the dynamic and static check of test stand, it ensures the reliability of ECU in real vehicle.
    经台架进行动态和静态的全面测试后,就可以保证ECU实际装车的可靠性。
  18. According to several typical operation modes of Fujian power system and using the sensitivity index and margin index of voltage stability, the static voltage stability is analyzed and the system voltage stability after n 1 check is also discussed.
    针对福建省电力系统的几种典型运行方式,利用电压稳定灵敏度指标和裕度指标进行了静态电压稳定性分析,并讨论了系统在(n-1)检验后的电压稳定性;
  19. According to the numerical simulation of heavy-duty diesel engine to raise power, two methods to assess the strength of cylinder head bolt, static calculation and fatigue stress check, are introduced.
    结合大功率柴油机提升功率的数值计算工作,介绍了评估气缸盖螺栓强度的两种方法:静强度分析法和疲劳强度校核法。
  20. The designers can take static interference analysis, dynamic interference analysis and strength check on die structure in the three-dimensional CAD system. These analyses can guarantee quality of die design. The three-dimensional model can be used in processing directly.
    并且可以在三维CAD系统中进行模具结构的静态干涉分析、动态干涉分析、强度校核等,保证模具的设计质量,模具的三维模型可以直接用于加工。
  21. Static data flow analysis method that used to check software errors are provided in this paper. Definition operation and reference operation are two kinds of operations on software variables.
    提出了面向故障检测的静态数据流分析方法。
  22. In according with the statute or rules the specification or rules, static analysis could check for the potential error in the software program when analysis the program source code.
    静态测试不需要编译运行程序代码,只依据规约或者规则对程序源代码进行分析以检测程序中是否有潜在的错误。
  23. Therefore, only static strength check is not enough, the reliability analysis should be combined with it.
    故只进行静强度校核是不够的,应结合可靠性分析。
  24. Because the switches need to configure static route to administrators, check the current configuration of routing and to facilitate the debugging from the developers during the test phase.
    因为交换机需要给管理员提供配置静态路由、查询当前配置的路由及方便开发人员在测试功能期间的调试。
  25. It could extract information from register-transfer level designs by static analysis technology, and check errors effectively and automatically. And it can help users to improve the quality of the hardware design and the efficiency of the design validation.
    该方法通过对RTL设计的源代码进行静态分析,能够有效的实现待检测错误的自动查找,可以帮助用户改进硬件设计的质量,提高设计验证的效率。
  26. Firstly, we introduced the logic synthesis tool Design compiler, physical design tool IC compiler, static timing analysis tool Primetime and logic equivalence check tool Formality. Then we summed up the main delay models, parameter extraction and timing optimization.
    本文分别介绍了逻辑综合工具DC、物理设计工具ICCompiler、静态时序分析工具PrimeTime和形式验证工具Formality,总结了实现设计中的主要延时模型、寄生参数提取及时序优化方法。
  27. According to the survey information, re-calculating the bearing capacity of the foundation soil, using the static loading test to check to the original design, the optimization for the project can save cost and the time limit.
    根据勘察资料,对地基土承载力进行重新计算,利用静载试验验算,对原来的设计方案进行了优化,为工程节省了造价,节约了工期。
  28. Based on the theory of finite element analysis, combining engineering practice, using the bridge structural analysis software, establish the finite element model of the extradosed cable-stayed bridge, compared the static load test check the model.
    在斜拉桥结构分析理论基础上,以实桥为工程背景,运用桥梁结构分析软件,建立矮塔斜拉桥空间有限元模型,以静力荷载试验为对比校核模型。
  29. Static timing analysis is very quick and effective on timing check, it can report almost all timing violations.
    作为时序检查快速有效的手段,静态时序分析可以发现所有微小的时序错误。